Please note! Due to the holidays, all orders placed from January 12th will be shipped on January 6th 🕒 at the earliest.

HG mold cleaner foam spray

0.5 l

    Usage

    A. Legal instructions for use: Only use as a means of combating mold (black deposits) in damp places is permitted. The
    instructions for use as indicated under B. Must be adhered to. The product is intended for non-professional use only. B. Instructions for use: Remove the lock before use. If you have used the bottle previously, there may be residue of the liquid left in the spout, which could cause it to function less well when reused. We therefore advise you, when reusing, to always first rinse the nozzle thoroughly using hot water from the tap, for example via the ventilation holes on the side of the foam pipe. The product has a bleaching effect, if in doubt first test on an inconspicuous place. Do not remove mold beforehand. Press the nipple on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm.
    In case of stubborn dirt, spray again after 30 minutes and allow to work for 30 minutes. Clean the sprayed surface with water and sponge. Elastic joints (e.g
    silicone sealant) wash off after approx. 30 minutes and spray again. After use, turn the nipple back a quarter turn (blocking position). Consumption: 2-3 m2 wall surface, 6-8 m2 tile joints. The vial must not be reused. Do not throw away in the container, hand in separately. Hazard statement Dangerous May be corrosive to metals. Causes severe burns and eye damage. Very toxic to aquatic organisms, with long lasting effects. Forms toxic gas in contact with acids. Corrosive to the respiratory tract. Caution! Do not use in combination with other products. Dangerous gases (chlorine) may be released.PrecautionsIf medical advice is needed, have the container or label at hand.Keep out of the reach of children.Wash hands thoroughly after handling this product.Wear protective gloves and eye protection.IF SWALLOWED : rinse the mouth. DO NOT induce vomiting. IF ON SKIN (or hair): remove contaminated clothing immediately. Rinse skin with water [or shower]. IF IN EYES: Rinse gently with water for several minutes; remove contact lenses, if possible; Continue rinsing. Keep locked up. Dispose of contents/packaging to collection point for hazardous or special waste.

    Ingredients

    Active substance and content:
    Sodium hypochlorite 4.2% (AS ACTIVE CHLORINE).

    HG mold cleaner foam spray

    0.5 l

      Product form

      Hg mold cleaner foam spray immediately and easily destroys all mold. This self-acting foam spray with longer adhesion quickly and effectively eliminates unhealthy black mold spots. * Destroys the most stubborn mold * Unique foam formula for optimal adhesion * Results within 30 minutes * Self-working

      €15 , 50

      €18,75 (incl. btw)

        Characteristics

        Corrosive, Harmful to the environment

        Save

        Transport and store in a cool, dark and upright position. Best before: See bottom of bottle. When stored at 20������ C in the dark. Longer shelf life at lower temperatures.

        Description

        Hg mold cleaner foam spray immediately and easily destroys all mold. This self-acting foam spray with longer adhesion quickly and effectively eliminates unhealthy black mold spots.




        * Destroys the most stubborn mold
        * Unique foam formula for optimal adhesion
        * Results within 30 minutes
        * Self-working

        Usage

        A. Legal instructions for use: Only use as a means of combating mold (black deposits) in damp places is permitted. The
        instructions for use as indicated under B. Must be adhered to. The product is intended for non-professional use only. B. Instructions for use: Remove the lock before use. If you have used the bottle previously, there may be residue of the liquid left in the spout, which could cause it to function less well when reused. We therefore advise you, when reusing, to always first rinse the nozzle thoroughly using hot water from the tap, for example via the ventilation holes on the side of the foam pipe. The product has a bleaching effect, if in doubt first test on an inconspicuous place. Do not remove mold beforehand. Press the nipple on the front and turn it a quarter turn. Spray the surface from a distance of 3-5 cm.
        In case of stubborn dirt, spray again after 30 minutes and allow to work for 30 minutes. Clean the sprayed surface with water and sponge. Elastic joints (e.g
        silicone sealant) wash off after approx. 30 minutes and spray again. After use, turn the nipple back a quarter turn (blocking position). Consumption: 2-3 m2 wall surface, 6-8 m2 tile joints. The vial must not be reused. Do not throw away in the container, hand in separately. Hazard statement Dangerous May be corrosive to metals. Causes severe burns and eye damage. Very toxic to aquatic organisms, with long lasting effects. Forms toxic gas in contact with acids. Corrosive to the respiratory tract. Caution! Do not use in combination with other products. Dangerous gases (chlorine) may be released.PrecautionsIf medical advice is needed, have the container or label at hand.Keep out of the reach of children.Wash hands thoroughly after handling this product.Wear protective gloves and eye protection.IF SWALLOWED : rinse the mouth. DO NOT induce vomiting. IF ON SKIN (or hair): remove contaminated clothing immediately. Rinse skin with water [or shower]. IF IN EYES: Rinse gently with water for several minutes; remove contact lenses, if possible; Continue rinsing. Keep locked up. Dispose of contents/packaging to collection point for hazardous or special waste.

        Active substance and content:
        Sodium hypochlorite 4.2% (AS ACTIVE CHLORINE).

        Dit heb je eerder bekeken

        Login

        Forgot your password?

        Don't have an account yet?
        Create account